Water Softener Troubleshooting Tips You Should Know

Published by Alamo Water Softeners on

Water Softener Troubleshooting Tips You Should Know

If you have a water softener, having it go on the fritz is the worst. You might be wondering how you can get it back up and running. Luckily, we have a few water softener troubleshooting tips you can use to address the issue. Read on to learn more!

Symptoms of a Faulty Softener

There are several ways to tell if your water softener is on the fritz. One easy way is to determine whether you’re noticing the same water issues as you did before you got the softener. You may notice a film on your hands in the shower or experience dry skin. You might see streaks on your dishes, and your appliances may start giving you trouble. If you have any issues, check to see if your water softener is working correctly. Luckily, we have water softener services in San Antonio that are here to help!

Simple Fixes

If the water softener is not working properly, sometimes the best thing to do is make sure it has power. Make sure your breaker is online and that you’ve plugged in the softener. Check the bypass valve that pulls water away from the softener. If it’s turned the wrong way, the water you’re using isn’t filtering properly. Close the valve, and you should be fine. These simple fixes may seem self-explanatory, but you should take these troubleshooting tips for your water softener seriously. Sometimes the simplest issue isn’t the most obvious.

In-Depth Fixes

It could be running at the wrong time of day or could simply not be regenerating. Generally, a single-tank softener should generate at night. If you use it during the day, the water usage is higher, and you may get hard water instead of your normal output.

Another issue is that sometimes there’s too much or too little salt in the tank. The salt level should always be 3–4 inches above the water level. If the water tastes salty, it likely has too much salt.

Alternately, it may overfill and fail to empty. If this happens, empty it by hand and clean it. If it’s not enough water in the tank, the float switch might be stuck, or there could be a clog. Try to unclog it or replace the float mechanism instead.

We’ve all been there—every homeowner has spent time wondering why their appliances aren’t working. That said, it’s often a simpler fix than you’d expect. We hope these tips have been helpful and wish you the best in your endeavors. If you’re in the San Diego area and need some help, check out Alamo Water Softeners today!

Book Now